شناخت انواع حافظه آردوينو و بهینه سازی آن

17 دیدگاه

به گفتگوی ما بپیوندید و دیدگاه خود را با ما در میان بگذارید.

• سلام خسته نباشید هنگام آپلود کدها رو برد آردینو اونو همچین پیغامی میده خواستم بپرسم علتش چیه و باید چیکار کرد؟ ممنون…Arduino: 1.8.5 (Windows 7), Board: “Arduino/Genuino Uno”

  Sketch uses 3076 bytes (9%) of program storage space. Maximum is 32256 bytes.
  Global variables use 125 bytes (6%) of dynamic memory, leaving 1923 bytes for local variables. Maximum is 2048 bytes.
  avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x30
  avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x0f
  avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x10
  avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x20
  avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x0f
  avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x10
  avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x30
  avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x0f
  avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x10
  avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x20
  An error occurred while uploading the sketch

  This report would have more information with
  “Show verbose output during compilation”
  option enabled in File -> Preferences.

  پاسخ

  • با سلام.
    در کامنت قبل پاسخ داده شد.

    پاسخ